whatman囊式组织培养溶液过滤器 的详细介绍Whatman Polycap一囊式组织培养溶液过滤器可以安全而有效地过滤要求严格的生物溶液和组织培养溶液。whatman囊式组织培养溶液过滤器特性：·具有低蛋白吸附膜·高效预滤·预先灭菌·不要求任何昂贵的设备·比常规方法降低了喷溅和泄露的危险·可用一个滤器作为另一个滤器的预滤装置·可将样品直接过滤到常压容器中

Polycap? TC (PES) is available with and without a filling bell, they aredisposable, dual layer polyethersulfone (PES) membrane filtration capsules thatprovide efficient filtration for critical aqueous solutions.The PES membrane is inherently hydrophilic, has low extractables, is biosafe,has excellent flow rates and exhibits low protein binding.Features and benefits Polycap TC/PES 0.2/0.1, 0.2/0.2 and 0.8/0.2 μm capsules pass the HIMA Challenge Test for Sterilizing Grade Filters 100% integrity-tested during manufacturing; results are correlated to microbial retention Housing thermally fused (no surfactants or mold releasing agents) Integrity-testable by bubble point, pressure decay or forward flow methods Available in sterile and nonsterile versions with a filling bell option Manufactured in clean room facilities under ISO Quality Systems PES membrane protein adsorption characteristics: HSA 0.4 μg/cm2 Insulin 2.0 μg/cm2 Gammaglobulin 1.5 μg/cm2

Applications Aqueous solutions Biologicals Buffers Cleaning/rinsing solutions Enzymes High-quality water Particle counting solutions Pharmaceutical solutions Reagent preparation Salt solutions Tissue culture media Virus suspensions Technical Properties - Polycap TC HousingPolypropylene VentOn inlet MembranePolyethersulfone (PES) Support systemPolypropylene SealingHeat-fused Maximum pressure4.1 bar (60 psi) Flow directionIf there is a prefilter, it is located on the inlet side and flow should follow arrows Endotoxin levelLAL tested, ≤ 0.5 EU/ml BiosafetyMaterials pass USP Class VI SterilizationCertain filter devices have been sterilized.* Capsule may be autoclaved at 121°C for 20 minutes (maximum 132°C). However, an integrity test should be performed after autoclaving. (*sterile and non-sterile options offered) Filtration area36 mm capsule: 440 cm2 (72 in2) 75 mm capsule: 930 cm2 (144 in2) 150 mm capsule: 1900 cm2 (302 in2) Water bubble point (final membrane)0.1 μm > 3.2 bar (46 psi) 0.2 μm > 2.7 bar (40 psi) 0.45 μm > 2.1 bar (30 psi) 1.0 μm > 1.1 bar (16 psi) SB - Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing 1/2 SB - Stepped barb for 10 to 12 mm (3/8 to 1/2") tubing MNPT - Male national pipe thread HB - Hose barb

Ordering Information - Polycap TC Catalog NumberDescription 6714-3601Polycap TC 36, 0.2/0.1 μm, sterile, with SB inlet and outlet,1/pk 6714-3602Polycap TC 36, 0.2/0.2 μm, sterile, with SB inlet and out,1/pk 6717-3602Polycap TC 36, 0.2/0.2 μm, sterile, with 1/2 SB inlet and outlet, 1/pk 2622NSPolycap TC 36, 0.2/0.2 μm, with HB inlet and SB outlet, 5/pk 6714-3604Polycap TC 36, 0.65/0.45 μm, sterile, with SB inlet and out, 1/pk 6715-3601Polycap TC 36, 0.2/0.1 μm, sterile, with SB inlet and outlet plus filling bell, 1/pk 6715-3602Polycap TC 36, 0.2/0.2 μm, sterile, with SB inlet and outlet plus filling bell, 1/pk 6716-3612Polycap TC 36, 0.2/0.2 μm, with 1/2 SB inlet and SB outlet plus filling bell, 1/pk 6716-3602Polycap TC 36, 0.2/0.2 μm, with MNPT inlet and SB outlet plus filling bell, 1/pk 6715-3604Polycap TC 36, 0.65/0.45 μm, sterile, with SB inlet and outlet plus filling bell, 1/pk 6715-3682Polycap TC 36, 0.8/0.2 μm, sterile, with SB inlet and outlet plus filling bell, 1/pk 6714-7501Polycap TC 75, 0.2/0.1 μm, sterile, with SB inlet and outlet,1/pk 6714-7502Polycap TC 75, 0.2/0.2 μm, sterile, with SB inlet and outlet,1/pk 2742CPolycap TC 75, 0.2/0.2 μm, sterile, with 1/2 SB inlet and outlet,5/pk 2742MPolycap TC 75, 0.2 μm, with MNPT inlet and outlet, 5/pk 6717-7504Polycap TC 75, 0.65/0.45 μm, sterile, with 1/2 SB inlet and outlet, 1/pk 6714-7504Polycap TC 75, 0.65/0.45 μm, sterile, with SB inlet and outlet, 1/pk 6717-7510Polycap TC 75, 1.0/1.0 μm, sterile, with 1/2 SB inlet and outlet, 1/pk 6715-7501Polycap TC 75, 0.2/0.1 μm, sterile, with SB inlet and outlet plus filling bell, 1/pk 6715-7502Polycap TC 75, 0.2/0.2 μm, sterile, with SB inlet and outlet plus filling bell, 1/pk 6716-7502Polycap TC 75, 0.2/0.2 μm, sterile, with MNPT inlet and SB outlet plus filling bell, 1/pk 6718-7504Polycap TC 75, 0.65/0.45 μm, with 1/2 SB inlet and SB outlet plus filling bell, 1/pk 6715-7582Polycap TC 75, 0.8/0.2 μm, sterile, with SB inlet and outlet plus filling bell, 1/pk 6717-9501Polycap TC 150, 0.2/0.1 μm, sterile, with 1/2 SB inlet and outlet, 1/pk 6717-9502Polycap TC 150, 0.2/0.2 μm, sterile, with 1/2 SB inlet and outlet, 1/pk 6704-9502Polycap TC 150, 0.2/0.2 μm, with 1 1/2" sanitary inlet and outlet, 1/pk 6717-9504Polycap TC 150, 0.65/0.45 μm, sterile, with 1/2 SB inlet and outlet, 1/pk 6717-9510Polycap TC 150, 1.0/1.0 μm, sterile, with 1/2 SB inlet and outlet, 1/pk 6718-9502Polycap TC 150, 0.2/0.2 μm, sterile, with 1/2 SB inlet and outlet plus filling bell, 1/pk 6718-9582Polycap TC 150, 0.8/0.2 μm, sterile, with 1/2 SB inlet and outlet

whatman滤膜层析产品一级代 理(二)

WHATMAN薄层层析板TLC WHATMAN尼龙膜 WHATMAN空气检测用滤膜PM2.5 PM10 3MM色谱纸31ET色谱纸3MM滤纸 WHATMAN囊式过滤器 WHATMAN硝酸纤维素膜NC膜 WHATMAN PVDF膜 WHATMAN PURADISC25针头式过滤器 WHATMAN盘式过滤器 WHATMAN基因组纯化试剂盒 FTA卡 全不锈钢真空过滤器 Partisil HPLC Columns 色谱柱